Arial
Wingdings
Monotype Sorts
Symbol
Helvetica
Helvetica-Narrow
hp deskjet 940c series
winspool
LPT1:
Over-circle for emphasizing start of Sequence
scratch.b1 Start circle `8Set Start circle to larger diameter for number in centre
scratch.b1 Start blob `1Set Start circle to 5mm diameter for number above
_Fill blob yellow ` Make the large outer ring yellow FillPattern
Make blob transparent `-Make the large outer ring transparent (white) FillPattern
Angle _Cross-box start 1 `$Set start on Cross-Box line 30° Down
Angle `"Set start on Cross-Box line 30 Cross-box start 2
Angle Main Axis start Set start to main axis
K Factor
Catalog No Fig 1
Any Figure from Fam. 1.6... Choose with right mouse button
`*Alan Cassidy, Freestyle Aviation, UK; 2001
`%Move start circle to desired position
Extend as required
`"Move end lines to desired position
scratch.c3 Fig 1.6.1 `#Make figure to Catalog number 1.6.1
scratch.c3 `#Make figure to Catalog number 1.6.2 Fig 1.6.2
scratch.c3 `#Make figure to Catalog number 1.6.3 Fig 1.6.3
scratch.c3 `#Make figure to Catalog number 1.6.4 Fig 1.6.4
scratch.a3 _Start circle `9Set Start circle to larger diameter with number in centre
scratch.a3 Start blob `2Set Start circle to 2mm diameter with number above
K Factor K Factor
Catalog No. CIVA Catalogue number
1.6.1
Any Loop from Fam. 7.5... Choose with right mouse button
Move upwards to enlarge radius
scratch.c3 Fig 7.5.1 `#Make figure to Catalog number 7.5.1
scratch.c3 `#Make figure to Catalog number 7.5.2 Fig 7.5.2
scratch.c3 `#Make figure to Catalog number 7.5.3 Fig 7.5.3
scratch.c3 `#Make figure to Catalog number 7.5.4 Fig 7.5.4
scratch.y1 _Start circle `9Set Start circle to larger diameter with number in centre
scratch.y1 Start blob `2Set Start circle to 2mm diameter with number above
scratch.c2 _Make Cross-Box Start (1) `(Set on Cross-Box, start line angled down
scratch.c2 Make Cross-Box Start (2) `&Set on Cross-Box, start line angled up
scratch.c2 Make Main Axis Start Set on main axis
scratch.d3 _Toggle roll delimiters `=Show or Hide lines delimiting rolling elements in top of loop
7.5.1
@&FV^bd
pwwp
Any 180
turn, upright or inverted.
ous rolls.
Extend indefinitely
scratch.c2 Fig 2.2.1 Upright turn Upright 270° turn
scratch.c2 Fig 2.2.2 Inverted turn Inverted 270° turn
scratch.a2 _Start circle `9Set start circle to larger diameter with number in centre
scratch.a2 Start blob `2Set start circle to 2mm diameter with number above
scratch.d1 _Rotate 30° Clockwise `0Set start on Cross-Box by rotating 30° Clockwise
scratch.d1 Rotate 30° Anti-Clockwise `5Set start on Cross-Box by rotating 30° Anti-Clockwise
scratch.d2 _Show '180' turn text `&Show text giving angle of turn degrees
scratch.d2 Hide '180' turn text `&Hide text giving angle of turn degrees
Scratch.A1 _Show Text Block Highlighting `*Give yellow background to text annotations
Scratch.A1 Hide Text Block Highlighting `.Remove yellow background from text annotations
Catalog No. CIVA Catalog number
2.2.1
Any Figure from Fam. 1.1... Choose with right mouse button.
`)Alan Cassidy, Freestyle Aviation,UK; 2001
Move roll point
Move end point
scratch.c2 Fig 1.1.1 `#Make figure to Catalog number 1.1.1
Fig 1.1.2 `#Make figure to Catalog number 1.1.2 scratch.c2
Fig 1.1.3 `#Make figure to Catalog number 1.1.3 scratch.c2
Fig 1.1.4 `#Make figure to Catalog number 1.1.4 scratch.c2
Angle rNFc _Line on cross-box axis 1 Rotate line to B-axis and down
Angle rNFc Line on cross-box axis 2 Rotate line to B-axis and up
Angle Line on main axis Rotate line to A-axis
_Start circle `9Set Start circle to larger diameter with number in centre scratch.a1
Start blob `2Set Start circle to 2mm diameter with number above scratch.a1
1.1.1
Any 90
turn, with B-Axis at 30
orientation
-Axis at 30
ation
scratch.c2 Fig 2.2.3 Erect turn
scratch.c2 Fig 2.2.4 Inverted turn
scratch.a2 _Start circle `6Set start circle to larger diameter with number inside
scratch.a2 Start blob `3Set start circle to 2mm diameter with number beside
scratch.c1 _Make cross-box (B-Axis) Start `)Rotates figure to start on secondary axis
scratch.c1 Make main axis (A-Axis) Start `'Rotates figure to start on primary axis
scratch.d2 _Show '90' turn text `&Show text giving angle of turn degrees
scratch.d2 Hide '90' turn text `&Hide text giving angle of turn degrees
2.2.3
One turn spin, any type
scratch.a2 Make Spin Positive
scratch.a2 Make Spin Negative
scratch.a1 _Spin with Upright Entry `$Spin entered from level upright line
scratch.a1 Spin with Inverted Entry `%Spin entered from level inverted line
Catalog No. CIVA Catalog Number
Spin Type Spin Positive or Negative Positive Negative
Entry Type Entry Type (Upright/Inverted) Upright Entry Inverted Entry
9.11.1.4
9.12.2.4
Positive
Upright Entry
9.10.1.4
9.10.3.4
Same Entry
Roll without hesitations
itations
Angle `Q(-DTû Rotate 45° Clockwise Rotate 45° Clockwise
Angle `Q(-DTû Rotate 45° Anti-Clockwise Rotate 45° Anti-Clockwise
Angle rNFc _Rotate 30° Clockwise `-Use for cross-box (B-Axis) level or 45° lines
Angle rNFc Rotate 30° Anti-Clockwise `-Use for cross-box (B-Axis) level or 45° lines
9.1.3.4
9.1.1.4
Lines to delineate last figure in sequence
Change spacing between lines
angle Q(-DTû Finish Cross-Box Rotate to show end on B-Axis
angle Finish on Main Axis Rotate to show end on A-Axis
End Lines
Connect End and Start of Figures on different levels
Dotted Line
Any Figure from Fam. 8.42... Choose with right mouse button.
` CUUUUU `%Move start circle to desired position
Change roll point
` CUUUUU `"Move end lines to desired position
scratch.c3 Fig 8.42.1 `$Make figure to Catalog number 8.42.1
scratch.c3 `$Make figure to Catalog number 8.42.2 Fig 8.42.2
scratch.c3 `$Make figure to Catalog number 8.42.3 Fig 8.42.3
scratch.c3 `$Make figure to Catalog number 8.42.4 Fig 8.42.4
scratch.c2 _Rotate 30° Clockwise `0Set start on Cross-Box by rotating 30° Clockwise
scratch.c2 Rotate 30° Anti-Clockwise `5Set start on Cross-Box by rotating 30° Anti-Clockwise
8.42.1
Any Figure from Fam. 7.2... Choose with right mouse button
` Move vertically to change radius
scratch.c3 Fig 7.2.1 `#Make figure to Catalog number 7.2.1
scratch.c3 `#Make figure to Catalog number 7.2.2 Fig 7.2.2
scratch.c3 `#Make figure to Catalog number 7.2.3 Fig 7.2.3
scratch.c3 `#Make figure to Catalog number 7.2.4 Fig 7.2.4
scratch.c2 _Start Cross Box (1) `(Set on Cross-Box, start line angled down
scratch.c2 Start Cross Box (2) `&Set on Cross-Box, start line angled up
scratch.c2 Start Main Axis Return to main axis orientation
7.2.1
Any Figure from Fam. 5.1... Choose with right mouse button
Position start of vertical up
Position end of vertical down
scratch.c3 Controls.x4 width*-0.5 Fig 5.1.1 `#Make figure to Catalog number 5.1.1
scratch.c3 Controls.x4 width*-0.5 `#Make figure to Catalog number 5.1.2 Fig 5.1.2
scratch.c3 Controls.x4 width*1.5 `#Make figure to Catalog number 5.1.3 Fig 5.1.3
scratch.c3 Controls.x4 width*1.5 `#Make figure to Catalog number 5.1.4 Fig 5.1.4
scratch.a2 _Start circle `9Set Start circle to larger diameter with number in centre
scratch.a2 Start blob `2Set Start circle to 2mm diameter with number above
5.1.1
Any Figure from Fam. 7.20... Choose with right mouse button.
`"Position to show start of 45° line
` Position to show end of 45° line
scratch.c3 Fig 7.20.1 `$Make figure to Catalog number 7.20.1
scratch.c3 Fig 7.20.2 `$Make figure to Catalog number 7.20.2
scratch.c3 Fig 7.20.3 `$Make figure to Catalog number 7.20.3
scratch.c3 Fig 7.20.4 `$Make figure to Catalog number 7.20.4
scratch.a3 _Start circle `:Set start circle to larger diameter with number in centre
7.20.1
wpww
Any Figure from Fam. 7.3... Choose with right mouse button
scratch.c3 Fig 7.3.1 `#Make figure to Catalog number 7.3.1
scratch.c3 `#Make figure to Catalog number 7.3.2 Fig 7.3.2
scratch.c3 `#Make figure to Catalog number 7.3.3 Fig 7.3.3
scratch.c3 `#Make figure to Catalog number 7.3.4 Fig 7.3.4
7.3.1
Any Figure from Fam. 8.32... Choose with right mouse button.
`$Move end lines and/or enlarge radius
scratch.c3 Fig 8.32.1 `$Make figure to Catalog number 8.32.1
scratch.c3 `$Make figure to Catalog number 8.32.2 Fig 8.32.2
scratch.c3 `$Make figure to Catalog number 8.32.3 Fig 8.32.3
scratch.c3 `$Make figure to Catalog number 8.32.4 Fig 8.32.4
8.32.1
Half roll vertical, level or 45
9.1.1.2
9.1.3.2
9.4.1.2
9.4.3.2
One-and-a-Quarter turn spin, any type
scratch.a1 _Spin with Same Entry `<Upright from Positive Entry, or Inverted from Negative Entry
scratch.a1 Spin with Opposite Entry `<Upright from Negative Entry, or Inverted from Positive Entry
scratch.a3 _Show Text Highlighting
Hide Text Highlighting scratch.a3
9.11.1.5
9.12.2.5
Quarter roll vertical, level or 45
Position '1/4' Text
Scratch.A2 _Show Text Block Highlighting `*Give yellow background to text annotations
Scratch.A2 Hide Text Block Highlighting `.Remove yellow background from text annotations
9.1.1.1
9.1.3.1
K Factor `Q(-DT
turn, B-axis at 30
to horizontal.
-axis at 30
scratch.c2 Fig 2.1.3 Erect turn
scratch.c2 Fig 2.1.4 Inverted turn
scratch.d2 _Show '270' turn text `&Show text giving angle of turn degrees
scratch.d2 Hide '270' turn text `&Hide text giving angle of turn degrees
2.1.3
Any Figure from Fam. 1.18... Choose with right mouse button
scratch.c3 Fig 1.18.1 `$Make figure to Catalog number 1.18.1
scratch.c3 `$Make figure to Catalog number 1.18.2 Fig 1.18.2
scratch.c3 `$Make figure to Catalog number 1.18.3 Fig 1.18.3
scratch.c3 `$Make figure to Catalog number 1.18.4 Fig 1.18.4
1.18.1
2 of 4 roll vertical, level or 45
Position '2/4' Text
Position '4' Text
Any Humpty-Bump from Fam. 8.3... Choose with right mouse button
Extend vertically as required
Move vertically to set height
scratch.c3 Fig 8.3.1 `#Make figure to Catalog number 8.3.1
scratch.c3 `#Make figure to Catalog number 8.3.2 Fig 8.3.2
scratch.c3 `#Make figure to Catalog number 8.3.3 Fig 8.3.3
scratch.c3 `#Make figure to Catalog number 8.3.4 Fig 8.3.4
8.3.1
Any Humpty-Bump from Fam. 8.1... Choose with right mouse button
scratch.c3 Fig 8.1.1 `#Make figure to Catalog number 8.1.1
scratch.c3 `#Make figure to Catalog number 8.1.2 Fig 8.1.2
scratch.c3 `#Make figure to Catalog number 8.1.3 Fig 8.1.3
scratch.c3 `#Make figure to Catalog number 8.1.4 Fig 8.1.4
8.1.1
pwpww
Any Figure from Fam. 7.1... Choose with right mouse button
scratch.c3 Fig 7.1.1 `#Make figure to Catalog number 7.1.1
scratch.c3 `#Make figure to Catalog number 7.1.2 Fig 7.1.2
scratch.c3 `#Make figure to Catalog number 7.1.3 Fig 7.1.3
scratch.c3 `#Make figure to Catalog number 7.1.4 Fig 7.1.4
7.1.1
Any Figure from Fam. 1.3... Choose with right mouse button
scratch.c3 Fig 1.3.1 `#Make figure to Catalog number 1.3.1
scratch.c3 `#Make figure to Catalog number 1.3.2 Fig 1.3.2
scratch.c3 `#Make figure to Catalog number 1.3.3 Fig 1.3.3
scratch.c3 `#Make figure to Catalog number 1.3.4 Fig 1.3.4
1.3.1
Any Figure from Fam. 1.7... Choose with right mouse button
scratch.c3 Fig 1.7.1 `#Make figure to Catalog number 1.7.1
scratch.c3 `#Make figure to Catalog number 1.7.2 Fig 1.7.2
scratch.c3 `#Make figure to Catalog number 1.7.3 Fig 1.7.3
scratch.c3 `#Make figure to Catalog number 1.7.4 Fig 1.7.4
1.7.1
Snap roll (positive or negative)
ative)
positive line
scratch.a2 _Make Snap Negative
scratch.a2 Make Snap Positive
scratch.a5 _Snap on Positive Line
scratch.a5 Snap on Negative Line
Scratch.a4 scratch.a4 _Increase apex angle
Scratch.a4 scratch.a4 Decrease apex angle
Line Type Line Type (Pos/Neg) Positive Line Negative Line
Apex Angle Apex Angle
9.9.1.4
9.9.3.4
9.10.6.4
9.10.8.4
9.9.6.4
9.9.8.4
Positive Line
Any Figure from Fam. 8.34... Choose with right mouse button
` SUUUUU `%Move start circle to desired position
`(Move vertically to control loop diameter
` SUUUUU `'Move horizontally to position end lines
scratch.c3 Fig 8.34.1 `$Make figure to Catalog number 8.34.1
scratch.c3 `$Make figure to Catalog number 8.34.2 Fig 8.34.2
scratch.c3 `$Make figure to Catalog number 8.34.3 Fig 8.34.3
scratch.c3 `$Make figure to Catalog number 8.34.4 Fig 8.34.4
Scratch.C4 _Finish on B-Axis (1)
Scratch.C4 Finish on B-Axis (2)
Scratch.C4 Finish on A-Axis
scratch.a4 _Toggle Roll Delimiters `$Turn roll delimiting marks on or off
8.34.1
Any Figure from Fam. 7.4... Choose with right mouse button
scratch.c3 Fig 7.4.1 `#Make figure to Catalog number 7.4.1
scratch.c3 `#Make figure to Catalog number 7.4.2 Fig 7.4.2
scratch.c3 `#Make figure to Catalog number 7.4.3 Fig 7.4.3
scratch.c3 `#Make figure to Catalog number 7.4.4 Fig 7.4.4
7.4.1
Any Figure from Fam. 8.41... Choose with right mouse button.
scratch.c3 Fig 8.41.1 `$Make figure to Catalog number 8.41.1
scratch.c3 `$Make figure to Catalog number 8.41.2 Fig 8.41.2
scratch.c3 `$Make figure to Catalog number 8.41.3 Fig 8.41.3
scratch.c3 `$Make figure to Catalog number 8.41.4 Fig 8.41.4
8.41.1
2-point Roll
without hesitations
Move text
9.2.3.4
9.2.1.4
3/4 snap roll (positive or negative)
Move to position text
9.9.1.3
9.9.3.3
9.10.6.3
9.10.8.3
9.9.6.3
9.10.1.3
9.9.8.3
9.10.3.3
2 of 8 roll vertical, level or 45
Position '2/8' Text
Position '8' Text
`.Remove yellow background from text annotations Hide Text Block Highlighting Scratch.A2
9.8.1.1
9.8.3.1
Three-quarter roll vertical, level or 45
9.1.1.3
9.1.3.3
4-point Roll
9.4.3.4
9.4.1.4
2-point rolls
t hesitations
r without hesitations
9.2.1.6
9.2.3.6
9.1.1.5
9.1.3.5
wwpww
wwpw
rolling turn, 3 rolls IN or OUT, B-axis at 30
scratch.c2 Fig 2.8.1 Start upright, rolls IN
scratch.c2 Fig 2.8.2 Start inverted, rolls IN
scratch.c2 Fig 2.8.3 Start upright, rolls OUT
scratch.c2 Fig 2.8.4 Start inverted, rolls OUT
2.8.1
1/2 snap roll (positive or negative)
9.9.1.2
9.9.3.2
9.10.6.2
9.10.8.2
9.9.6.2
9.10.1.2
9.9.8.2
9.10.3.2
4 of 8 roll vertical, level or 45
Position '4/8' Text
9.8.1.2
9.8.3.2
Any Figure from Fam. 8.43... Choose with right mouse button
` SUUUUU `*Move horizontally to position start circle
scratch.c3 Fig 8.43.1 `$Make figure to Catalog number 8.43.1
scratch.c3 `$Make figure to Catalog number 8.43.2 Fig 8.43.2
scratch.c3 `$Make figure to Catalog number 8.43.3 Fig 8.43.3
scratch.c3 `$Make figure to Catalog number 8.43.4 Fig 8.43.4
Scratch.C4 _Start on B-Axis (1)
Scratch.C4 Start on B-Axis (2)
Scratch.C4 Start on A-Axis
8.43.1
Any Figure from Fam. 1.39... Choose with right mouse button
Move Roll Point
Extend diagonal as desired
scratch.c3 Fig 1.39.1 `$Make figure to Catalog number 1.39.1
scratch.c3 `$Make figure to Catalog number 1.39.2 Fig 1.39.2
scratch.c3 `$Make figure to Catalog number 1.39.3 Fig 1.39.3
scratch.c3 `$Make figure to Catalog number 1.39.4 Fig 1.39.4
1.39.1
ppwwp
ppwp
Any Figure of 8 from Family 7.37. Choose with right mouse button
Position roll point
scratch.c3 Fig 7.37.1 `$Make figure to Catalog number 7.37.1
scratch.c3 Fig 7.37.2 `$Make figure to Catalog number 7.37.2
scratch.c3 Fig 7.37.3 `$Make figure to Catalog number 7.37.3
scratch.c3 Fig 7.37.4 `$Make figure to Catalog number 7.37.4
scratch.x1 _Start circle `9Set Start circle to larger diameter with number in centre
scratch.x1 Start blob `2Set Start circle to 2mm diameter with number above
7.37.1
rolling turn, 3 alternating rolls starting IN or OUT, B-axis at 30
scratch.c2 Fig 2.13.1 Start upright, rolls IN
scratch.c2 Fig 2.13.2 Start inverted, rolls IN
scratch.c2 Fig 2.13.3 Start upright, rolls OUT
scratch.c2 Fig 2.13.4 Start inverted, rolls OUT
2.13.1
Any Figure from Fam. 1.14... Choose with right mouse button
scratch.c3 Fig 1.14.1 `$Make figure to Catalog number 1.14.1
scratch.c3 `$Make figure to Catalog number 1.14.2 Fig 1.14.2
scratch.c3 `$Make figure to Catalog number 1.14.3 Fig 1.14.3
scratch.c3 `$Make figure to Catalog number 1.14.4 Fig 1.14.4
1.14.1
h or without hesitations
9.1.1.6
9.1.3.6
snap roll (positive or negative)
on a positive line
Decrease apex angle Scratch.a4 scratch.a4
9.9.1.6
9.9.3.6
9.10.6.6
9.10.8.6
9.9.6.6
9.10.1.6
9.9.8.6
9.10.3.6
Any Humpty-Bump from Fam. 8.4... Choose with right mouse button
scratch.c3 Fig 8.4.1 `#Make figure to Catalog number 8.4.1
scratch.c3 `#Make figure to Catalog number 8.4.2 Fig 8.4.2
scratch.c3 `#Make figure to Catalog number 8.4.3 Fig 8.4.3
scratch.c3 `#Make figure to Catalog number 8.4.4 Fig 8.4.4
8.4.1
Logo
1.6.3
Other
` gfffff
` HDDDDD
` fUUUUU
7.3.3
` TUUUUU
9.1.4.2
9.1.5.1
` lfffff
9.1.2.2
` 2fffff
` pfffff
` RUUUUU
9.4.4.2
1.1.4
` \fffff
1.3.4
` ffffff
` afffff
` SUUUUU
5.1.4
7.4.3
8.41.2
9.10.10.3
9.9.5.3
9.9.10.3
9.10.5.3
9.1.5.2
9.1.2.1
9.1.2.3
9.1.2.4
` efffff
9.10.9.4
9.9.4.4
9.9.9.4
9.10.4.4
` [fffff
7.37.3
` KUUUUU
2.13.2
` eUUUUU
9.10.4.2
Negative Line
9.10.9.2
9.9.4.2
9.9.9.2
9.1.4.4
9.8.4.2
` offfff
9.8.5.1
9.4.5.2
9.4.2.2
9.10.2.4
9.9.2.4
9.10.7.4
9.9.7.4
9.1.4.6
8.4.2
` wfffff
9.1.5.4
Guide
TheDoc
Gesture Format
Primary
Sportsman
Intermediate
Advanced
Unlimited
Helv 12pt Mid Right
Helv 10pt Mid Left
Black small dash
Blue fill
Blue dark fill
Hairline
White fill
Black 3pxl line
White solid
Black 5pxl line
Fig 1
K_factor
Catalog_No
Dashed
Solid
Delimiters
Ghost Line
SpinType
Entry
Last Fig
Figures
Wind
IAC Logo
Contest
Form
Level
Program
Date
Basic 1
Basic 2
Basic 3
Basic 4
Basic 5
Fig 1.10
Straight Line link
Arrow
Straight Line link.47
Straight Line link.48
Basic 6
Basic 7
Basic 8
Basic 9
Fig 1.25
POINT ROLL
Line
Apex_Angle
Basic 13
Basic 10
Basic 11
Straight Line link.65
Straight Line link.66
Basic 12
Straight Line link.60
Fig 1.45
Arrows
Straight Line link.61
Fig 1.66
2.13.x Alt
Straight Line link.59